LC10 Cellule de conductivité pour eau pure pour SD320 / SD325 avec câble de 1m
For water analysis in laboratories or mobile
- Precise 2-pole stainless steel electrodes (K ≈ 0.1 cm-1) for the determination of low conductivities (≤ 200 µS/cm, also suitable for ultrapure water)
- Elimination of influences by atmospheric CO2 via a flow cell suitable for 12 mm probes
- Automatic temperature compensation (NTC 10 kΩ)
The SD conductivity cell type LC 10 has been developed for conductivities below 200 µS/cm. With the use of two sensitive stainless-steel electrodes even the conductivity of ultrapure water can be determined easily and with highest accuracy. The integrated flow cell made of glass eliminates fluctuations in measured values caused by the introduction of CO2 from the air. The built-in NTC 10 kΩ thermistor provides the necessary automatic temperature compensation.
Numéro d'ordre 19805046
Informations sur les produits
| Gamme de mesure | < 200 µS/cm |
| Température de fonctionnement | -5 - 80 °C |
| Type de capteur | 2-Pole |
| Capteur de température intégré | NTC 10 kΩ |
| Matériau extérieur | Acier inoxydable |
| Constante de cellule | K ≈ 0.1 cm-1 |
| Longueur | 75 mm |
| Diamètre | 12 mm |
| Longueur de câble | 1 m |