Électrode d’oxygène pour SD 310 / SD 315 Oxi avec câble de 2 m, cathode platine / anode plomb
- Galvanic oxygen sensor for determination of dissolved oxygen up to 70 mg/L
- Pressure-resistant and suitable for water depths of up to 30 m
- Choice of three different cable lengths: 2 m, 10 m, 30 m
- Automatic temperature compensation (NTC 10 kΩ)
The SD oxygen sensor type Oxi 300 is suitable for the galvanic determination of dissolved oxygen up to 70 mg/L. The sensor is extremely pressure resistant (max. 3 bar), so that water depths of up to 30 m can be reached without any problems. The membrane at the sensor tip is specifically adapted to the permeability of O2 and can be easily replaced if necessary. An an NTC 10 kΩ thermistor enables the precise determination of dissolved oxygen independent of its temperature-dependent solubility behavior.
Numéro d'ordre 19805050
Informations sur les produits
| Gamme de mesure | 0 - 70 mg/l O2 Concentration ; 0 - 600 % (O2 Saturation) |
| Température de fonctionnement | 0 - 40 C° |
| Type de capteur | Galvanic |
| Capteur de température intégré | NTC 10 kΩ |
| Matériau extérieur | ABS |
| Longueur | 120 mm |
| Diamètre | 12 mm |
| Longueur de câble | 2 m |