Disinfection Test Kits

For disinfection control in commercial buildings

  • On-site testing before and after disinfection works
  • Monitoring the correct concentration for your system
  • Determination of pH, Chlorine & more disinfection parameters
  • Complete kit for economic & fast results

Lovibond® Disinfection Kits can support you with on-site microbiological testing before and after remedial disinfection works:

  • Chlorine and peroxide based Test Kits to monitor concentration of active disinfectant
  • Disinfectant tests to ensure that you have the correct concentration for your system - effective kill without corrosion.
  • A range of test strips to economically monitor the pull through of disinfectant solutions to all parts of the system
    • Our range of Kits is adapted to your special needs and allows accurate measurements.

     

    Toepassingen

    • Controle desinfecteermiddel
    • Koelwater
    Omschrijving Parameters en bereik Bestelnr. Offertewagen
    Disinfection Chlorine Test Kit
    The complete equipment for professionals to control all important disinfection parameters including Legionella. Avoid midosing material damage.
    		Chloor (vrij) 1 - 300 mg/L Cl2 Colours may vary depending on sample and test conditions.
    Chloor HR 10 - 200 mg/L Cl2
    pH 7 - 14 pH     		56K701130
    Disinfection Chlorine Dioxide Test Kit
    Monitor the reliable disinfection prevention effect especially against Legionella. Simple for use for technical non-technical operators.
    		Chlorine Dioxide 0.16 - 600 mg/L ClO2
    pH 0 - 14 pH     		56K701140
    Disinfection Hydrogen Peroxide Test Kit
    Get the whole equipment to monitor the concentration of hydrogen peroxide as disinfectant and biozide. Avoid Legionella and infestation with biofilm.
    		Hydrogen Peroxide 15 - 500 mg/L H2O2
    Hydrogen Peroxide test strips 0.5 - 100 mg/L H2O2
    pH 7 - 14 pH     		56K701150
    Disinfection Test Kit (combined)
    For use in all major applications for the control of disinfection: From chlorine and chlorine dioxide to hydrogen peroxide, compliant with regulations.
    		Chloor (vrij) 1 - 300 mg/L Cl2 Colours may vary depending on sample and test conditions.
    Chloor HR 10 - 200 mg/L Cl2
    Chlorine Dioxide 0.16 - 600 mg/L ClO2
    Hydrogen Peroxide 15 - 500 mg/L H2O2
    Hydrogen Peroxide test strips 0.5 - 100 mg/L H2O2
    pH 7 - 14 pH     		56K701160
    Omschrijving Online Download Type Format Taalversie Directe download
    Leaflet Disinfection Test Kit Leaflets PDF (2.98 MB)
    Brochure Industrial Water Monitoring Leaflets PDF (1.40 MB)